In case your Netgear router keeps dropping connection, it is because you have not set up your device via 192.168.1.1 properly. However, there can be plenty of other reasons behind this issue. But, let us not get into the reasons. Let us focus more on how to troubleshoot the Netgear router keeps dropping connection issue. For that, you need to walk through the troubleshooting hacks mentioned in this article. Let us get the ball rolling.
[Resolved] Netgear Router Keeps Disconnecting Issue
1. Check the Power Supply
The biggest reason why you have got your knickers in a twist because of the Netgear router keeps dropping connection issue is because of an inadequate power supply. And this might be because of a damaged wall socket.
Thus, only one thing is required here. And that thing demands you to plug your Netgear router into a different power outlet. After this, check if the Netgear router keeps dropping connection issue persists. If it does, scroll down.
2. Bring the Device Closer
Perhaps, there is way too much distance between the networking devices. By networking devices, we are referring to the router and modem. Too much distance can stop the signals from freely getting transmitted.
Therefore, bring the devices closer. Once done, also check that the distance is not too less. That can also be troublesome as the signals of devices can clash at any hour of the day. Due to this, you will come across various other issues.
3. Verify the Ethernet Connection
Are you not able to troubleshoot the Netgear router keeps dropping connection issue? Well, that might be because of a loose cable connection. Here, we are referring to the Ethernet connection between the networking devices.
Maybe the Ethernet cable is chapped from somewhere. To take care of the thing, you either need to replace the Ethernet cable with a new one or connect your networking devices with the assistance of a wireless source of connection.
4. Update the Firmware
Another effort that you can make from your end to troubleshoot the Netgear router keeps dropping connection issue is to update the firmware of your device via router login.
In case you need help to update the firmware of your device, it is recommended that you refer to the user manual. In case you do not, then you should use the Netgear Nighthawk app to go about the Netgear router firmware update process.
5. Perform Factory Default Reset
Within some time, you will be able to get rid of the Netgear router keeps dropping connection issue after following the hacks mentioned above, on the off chance, you are not able to, resetting your device is recommended.
Here is how you can restore your device to its factory default settings:
- Make use of your eyes and look at all sides of your Netgear router.
- Within a short period of time, you will find the Reset button.
- After this, you need to press the Reset button.
- Wait for some time.
As soon as you are done resetting your wireless device, your next move should be to perform Netgear router setup. You can do so using any method that you like. If you want to do Netgear AC1750 setup or Netgear AC1200 setup, then refer to the user manual.
After walking through all these troubleshooting hacks, check if the Netgear router keeps dropping connection issue has left you for good.
Facing the Netgear router keeps dropping connection issue is nothing to be afraid of. The reason being, it is a very basic issue to fix. Hopefully, you will be able to do so using the hacks mentioned in this post. If you do, share your feedback with your fellow readers.